Quick Answer: Does Dulux Satinwood Need Undercoat?

How long does it take for Dulux satinwood to cure?

6 hoursDrying Time Leave 6 hours to dry.

Newly painted doors and windows should not be closed until paint is fully dry..

Do you need to undercoat before using satinwood?

Prime first with a good quality primer, two coats of undercoat. Sanding down and dusting off each time. Then apply the finish coat, be it satinwood or gloss. This idea of satinwood paint being self undercoating is a no no for me.

Can you use water based satinwood over oil based undercoat?

It wont hurt to apply the water-based Satinwood over oil based undercoat.

Is Dulux satinwood paint oil based?

Dulux Trade Satinwood is a high VOC content mid sheen finish and is a oil based washable product that can be applied by brush or roller. … Satin is a tough, durable mid sheen finish for wood and metal and can be applied over most previously painted surfaces without an undercoat.

Do you use undercoat with satinwood paint?

Dulux Trade Satinwood is a solvent-based satin finish formulation that is tough, hardwearing and dirt resistant. Does not require an undercoat except where a strong colour change is required.

How do I get a good finish with satinwood?

If using satinwood or eggshell then apply 2 coats for best results. Make sure to rub down between coats. The finish coat will take longer to dry than the undercoat or primer. Make sure not to use to much paint at this stage because it will drip or sag if there’s a lot applied.

Should I use oil or water based primer?

Water based primer is usually used for walls and ceilings where there is new work and preparation is required, and oil based primer is primarily used for doors, windows, metal or woodwork. Enamel is hardier so surfaces that require heavy traffic or exposure to the elements are usually painted in enamel.

Does Dulux Diamond satinwood need undercoat?

The normal finishing process is 2 full coats of Dulux Trade Diamond Satinwood. Where a strong colour change is involved then a coat of Dulux Trade Quick Dry Undercoat may be required. After use, remove as much paint as possible from equipment before cleaning with water.

Is satinwood better than gloss?

If you choose a satin finish (also known as satinwood), you’ll be getting a semi-gloss. It’s not as shiny as gloss but not as matt as an eggshell finish. If you’re aiming for a modern and contemporary interior, this would be a much better choice as opposed to gloss due to a matt finish complementing bold colours.

Is Dulux Trade Satinwood any good?

Dulux oil-based satinwood is great paint!! Yes it’s one of the best out there, self-undercoating and covers in two coats. I love it. I mostly use Johnstone’s products now to be honest, but I’d choose Dulux over Johnstone’s for oil-based satinwood.

Is undercoat the same as primer?

Decorators often use the terms interchangeably but in simple terms an undercoat is always a primer, but a primer is not always an undercoat. … One easy way to remember is if a surface is painted use an undercoat, if it’s new use a primer.

What happens if you put water based paint over oil based paint?

Using water-based or acrylic paint when painting over oil-based paint is likely to cause peeling or chipping because those formulas don’t bond well with the naturally glossy surface of oil-based paint. … Fortunately, with the proper approach, you can successfully use water-based paint over oil-based paint.